OSHA electrical safety-related work practices in general industry (29 CFR 1910 Subpart S, 1910.331-1910.335): deenergizing, qualified persons, lockout and verification, overhead lines, conductive items, working space, training and alerting techniques. Free practice quiz with instant feedback; every explanation cites the 29 CFR paragraph it is based on. Independent review material: not affiliated with or endorsed by OSHA, not an OSHA Outreach (10/30-hour) exam, and it does not replace the training and evaluation your employer must provide.
Frage 1 · Einfachauswahl · 90 s · 1 Pkt.
Under OSHA's electrical work practice rules, what is the default for live parts an employee may be exposed to?
- Work on them live, with rubber gloves
- Cover them with electrical tape and carry on working
- Work on them only during the night shift
- Deenergize them before work on or near them
Frage 2 · Einfachauswahl · 90 s · 1 Pkt.
Which reason does OSHA accept for NOT deenergizing before work?
- The job will take less than ten minutes
- Deenergizing would delay an urgent production order for a customer
- Deenergizing would shut down life support equipment
- The worker has done this job many times
Frage 3 · Einfachauswahl · 90 s · 1 Pkt.
Who may work on electric circuit parts that have not been deenergized?
- Only qualified persons
- Any trained employee
- Any supervisor on site
- Anyone with insulated tools
Frage 4 · Mehrfachauswahl · 90 s · 1 Pkt.
What must a qualified person be trained in, at a minimum? Choose the 3 correct answers.
- Distinguishing exposed live parts from other parts
- Determining the nominal voltage of exposed live parts
- The clearance distances and their voltages
- Designing a new building's wiring layout
Frage 5 · Wahr / Falsch · 90 s · 1 Pkt.
A push button or selector switch may be used as the only means of deenergizing equipment before work.
Frage 6 · Einfachauswahl · 90 s · 1 Pkt.
Before deenergized equipment can be worked as deenergized, what must a qualified person do?
- Wait at least 30 minutes after switching off
- Use test equipment to verify the parts are deenergized
- Ask the operator whether the machine is off
- Check that the indicator light on the control panel has gone off
Frage 7 · Einfachauswahl · 90 s · 1 Pkt.
What should happen to stored electric energy, such as in capacitors, before work?
- Nothing, it drains away by itself in time
- It is released: capacitors discharged and grounded
- It is measured and the reading written on the lockout tag
- It is left alone if the panel door is closed
Frage 8 · Einfachauswahl · 90 s · 1 Pkt.
When may a lock be placed without a tag on electrical equipment?
- Whenever the job is expected to take less than one full shift
- Never: OSHA always requires both a lock and a tag
- When the worker is the only person on site that day
- One circuit, within the shift, with familiar employees
Frage 9 · Einfachauswahl · 90 s · 1 Pkt.
How close may an unqualified person, or the longest conductive object they hold, come to an unguarded overhead line of 50 kV or less?
- Not closer than 3 feet
- Not closer than 6 feet
- Not closer than 10 feet
- Not closer than 20 feet
Frage 10 · Wahr / Falsch · 90 s · 1 Pkt.
Portable ladders used where they could contact exposed energized parts must have nonconductive siderails.
Frage 11 · Mehrfachauswahl · 90 s · 1 Pkt.
Which items may not be worn if they could contact exposed energized parts, unless made nonconductive? Choose the 3 correct answers.
- Rings
- Watch bands
- Metal headgear
- Cotton work gloves
Frage 12 · Einfachauswahl · 90 s · 1 Pkt.
What may the working space in front of electric equipment be used for?
- Storing spare parts
- Parking pallet jacks
- Nothing but access and work
- Keeping cleaning carts and ladders
Frage 13 · Einfachauswahl · 90 s · 1 Pkt.
What does OSHA say about the type of electrical safety training?
- It must be an online course with a final exam
- Classroom or on-the-job, scaled to the risk
- It must be delivered by an OSHA inspector
- One video is enough for every employee
Frage 14 · Einfachauswahl · 90 s · 1 Pkt.
Where signs and barricades do not give enough warning around exposed energized parts, what must be used?
- A louder alarm bell installed on the panel
- A longer written procedure for the job
- A second lock and a tag on the main disconnect switch
- An attendant stationed to warn and protect employees