Specific training, high risk: construction sites, working at height and machines

by Quizhat · 14 questions · Updated · CC BY

English

For construction and manufacturing workers attending the high-risk specific training module (12 hours): construction sites, falls from height, machines, confined spaces, electrical risk. 14 questions, about 9 minutes. Translated from Italian: legal references remain the Italian ones (D.Lgs. 81/2008) Sources: D.Lgs. 81/2008 arts. 37, 66, 82, 83, 136; Accordo Stato-Regioni 21/12/2011; D.P.R. 177/2011; CEI 11-27 · Reviewed 21/10/2026 · Training support, not a certification.

Also available in: Español,Română,Français,Italiano

Quiz questions

1 / 14 · 30s · 1 pt

How many hours of specific training does the State-Regions Agreement provide for workers in high-risk companies?

  • 4 hours
  • 32 hours
  • 12 hours
  • 8 hours

2 / 14 · 30s · 1 pt

According to art. 107 of D.Lgs. 81/08, when does work at height apply?

  • Only above 5 metres
  • From 50 centimetres upwards, in any case
  • When the worker is exposed to the risk of falling from a height of more than 2 metres above a stable surface
  • Only on roofs

3 / 14 · 30s · 1 pt

Who draws up the Safety and Coordination Plan (PSC)?

  • The works director (direttore dei lavori)
  • The ASL (local health authority)
  • Each contractor
  • The safety coordinator for the design phase (CSP)

4 / 14 · 30s · 1 pt

What is the POS?

  • The general plan drawn up by the client for all contractors
  • The register of medical examinations on the site
  • The operational safety plan that each contractor draws up for the individual site
  • The building permit issued by the municipality

5 / 14 · 30s · 1 pt

When must the client appoint the design-phase coordinator?

  • Only for public works
  • Never: the main contractor appoints them
  • When the presence of more than one contractor is expected on the site, even if not at the same time
  • Only on sites over 200 man-days

6 / 14 · 30s · 1 pt

What minimum height must a standard guardrail against falls into the void have?

  • 1 metre
  • 60 centimetres
  • 80 centimetres
  • 1.5 metres

7 / 14 · 30s · 1 pt

Which system protects against falls from height when collective protection is not possible?

  • Safety shoes with a non-slip sole
  • A full-body harness connected to a secure anchor point with a lanyard and energy absorber
  • A waist work-positioning belt without an anchor
  • A helmet with a chin strap

8 / 14 · 30s · 1 pt

What is the PiMUS?

  • The permit for electrical work
  • The scaffolding assembly, use and dismantling plan
  • The machine maintenance plan
  • The training programme for supervisors (preposti)

9 / 14 · 20s · 1 pt

Erecting and dismantling scaffolding may only be carried out by workers who have received specific training.

  • True
  • False

10 / 14 · 30s · 1 pt

A workpiece gets jammed between the moving parts of a machine. What do you do?

  • Remove the piece by hand with the machine running, being careful
  • Keep working until the piece comes free on its own
  • Take off the guard and use a tool while the machine turns slowly
  • Stop the machine and make it safe before intervening, following the procedures

11 / 14 · 30s · 1 pt

On a sewer site a colleague loses consciousness in a manhole. What is the correct reaction?

  • Go down immediately to get them, holding your breath
  • Lower an FFP2 dust mask to your colleague
  • Wait for them to recover on their own
  • Do not enter without protection: raise the alarm and activate the rescue procedure with breathing apparatus and recovery equipment

12 / 14 · 30s · 1 pt

In electrical work under the CEI 11-27 standard, what does the abbreviation PES mean?

  • Skilled person in the electrical field (persona esperta)
  • Emergency and rescue plan
  • Safety expert supervisor
  • External supervision person

13 / 14 · 45s · 1 pt

Which documents or roles concern the safety of temporary or mobile construction sites? (2 answers)

  • The preliminary notification sent before work begins
  • The execution-phase safety coordinator (CSE)
  • The GDPR record of processing activities
  • The HACCP self-monitoring manual

14 / 14 · 30s · 1 pt

Why is practical training in the use of the fall-arrest harness mandatory?

  • Because the supplier requires it
  • It is not mandatory: reading the information leaflet is enough
  • Because it is a category III PPE, which protects against risks of death or serious and irreversible harm
  • Because it costs more than other PPE

How to use it

Copy the quiz into your free account, edit it if needed and run it live: players join from their phones with a code or a QR code, no app needed. The correct answers are not published here: you see them in your copy.

Related quizzes

Segnala questo quiz